FO-DCS modular subracks, 19“/4U
to take 12 FO-DCS plug-in modules / front plates 3U/7HP
Modularly equippable FO-DCS 19”/4U subrack
Strain reliefs and blank partial front plates
Sturdy aluminium housing with side panels and front 19“/3U mounting brackets.
Pre-assembled with horizontal 84HP guide rails to take a maximum of twelve 3U/7HP FO-DCS plug-in modules or front plates.
The extractable excess cable length tray (1U) is equipped with a base and offers 2 big slots on one side and pre-cut holes on the other side.
It can be inserted to the subrack on the fourth rack unit from the rear in two ways, so that optionally the slots or holes can be used as cable entry openings.
The slightly recessed arrangement of the excess cable length tray allows a 19“/1U management panel with support brackets or a patch mangement tray with guide elements to be fitted at the front.
The modularly equippable 19”/4U subrack can be used for a wide variety of applications, depending on the type of plug-in module or front plate.
It can be used as a modular high-density solution for up to 144 duplex ports (288 fibres) or up to 144 MTP ports (1728 fibres) in the data centre environment.
It will accept up to 12 FO-DCS 3U/7HP plug-in modules or up to 12 FO-DCS 3U/7HP front plates that are used to terminate pre-assembled LCD or MTP® trunk or breakout cables or fibre optic cables which are spliced in-situ. (It will also accept 12 RJ45 Keystone plug-in modules).
Easy migration to all parallel optic applications, e.g. to 40/100 GbE, is possible with FO-DCS 3U/7HP MTP front plates.
Scope of delivery
19”/4U subrack with 19” mounting brackets on 3U (without plug-in modules / front plates).
84HP guide rails for 12 3U/7HP FO-DCS inserts.
1U excess cable length tray, integrated, insertable from rear.
19” mounting material.
Cable support rails and more accessories available. May be combined with various blanking panels and management panels from the Datwyler range.
|Colour:||Aluminium, anodised or black|
|Dimensions:||19“/4U, W x H x D: 482.6 x 177.6 x 295 mm|
|Acceptance capacity:||84HP, 12 3U/7HP FO-DCS inserts|
MTP® is a registered brand of US Conec.
|Article No.||Product||Material / Colour||PU|
|470540||FO-DCS modular subrack, 19“/3U, 84HP (without excess length tray)||Alu, anodised||1 pc.|
|470542||FO-DCS modular subrack, 19“/4U, 84HP||Alu, anodised||1 pc.|
|470642||FO-DCS modular subrack, 19“/4U, 84HP||Alu, black||1 pc.|
|470549||Strain relief for FO-DCS modular subrack 4U (depth: 80 mm)||1 pc.|
|470649||Strain relief for FO-DCS modular subrack 4U, with black brush strip (depth: 48 mm)||1 pc.|
|470648||Strain relief for FO-DCS modular subrack 4U (depth: 48 mm)||1 pc.|
|470555||FO-DCS blank partial front plate 3U/7HP||Alu, anodised||1 pc.|
|571595||FO-DCS blank partial front plate 3U/7HP||PC, black||1 pc.|