CU 6502 4P SHF1

Data cable, U/FTP, Category 6_A, AWG23, Euroclass Dca

1 Inner conductor: AWG23 Bare copper wire
2 PE insulated conductor: 1.3 mm Ø
3 Screen (pair): Alu PETP foil
4 Drain wire: Tinned copper wire
5 Outer sheath: FRNC/LS0H + SHF1

Description

Electrically and mechanically improved quality Cat.6A data cable - fulfils the requirements of ISO/IEC 11801, IEC 61156-5, EN 50173-1 and prEN 50288-10-1.
Good shielding effect due to individually screened pairs.
Oil resistant, fire retardant and halogen free sheath.
Compatible with all current connecting hardware in accordance with EN 50173 and ISO/IEC 11801.
Certified by Det Norske Veritas (DNV No. ).

Application

Data cable for structured premises cabling - designed for use in industrial areas, particularly for higher requirements in offshore and marine applications.
Oil resistant, flame retardant and zero halogen outer sheath.
For the transmission of digital and analogue voice, video and data signals.
Suitable for all ICT network applications up to class EA applications (500 MHz) in accordance with EN 50173-1 and ISO/IEC 11801.
Applicable for Power over Ethernet (PoE) / PoE+.
Supported Applications: 10Base-T, 100Base-T, 1000Base-T, 2.5GBase-T, 5GBase-T, 10GBase-T, Fieldbus

Graph

Category				5e	6	6_A
Frequency [MHz]	1	4	10	100	250	500
Attenuation [dB/100m]	2.1	3.8	5.9	19	30	43
NEXT [dB]	93	93	93	93	83	75
PS NEXT [dB]	90	90	90	90	80	72
ACR-N [dB]	91	89	87	73	53	32
PS-ACR-N [dB]	88	86	84	70	50	29
ACR-F [dB]	96	96	96	74	56	33
PS-ACR-F [dB]	93	93	93	71	53	30
Return loss [dB]	26	28	30	30	27	21
These performance data are typical measured values.

Electrical properties

Category:	Cat.6_A
Coupling attenuation:	55 dB
Delay Skew:	5 ns/100 m
Impedance at 100 MHz, ±5Ω:	100 Ω
Loop resistance at 20°C:	< 150 Ω/km
Near end unbalance attenuation LCL at 1-600 MHz:	40 dB
NVP %:	79
operating capacity:	42 pF/m
Transfer impedance 1/10/30 MHz:	< 50/100/200 mΩ/m

Supported applications

10Base-T, 100Base-T, 1000Base-T, 2.5GBase-T, 5GBase-T, 10GBase-T, Fieldbus

Mechanical properties

Minimum bending radius during installation:	56 mm
Minimum bending radius permanently installed:	28 mm
Tensile strength (4P):	95 N
Tensile strength (2x4P):	190 N
Minimal crush resistance / 10cm:	1,000 N
Minimum number of impacts:	10
Installation temperature:	0 °C - +50 °C
Operating temperature:	-20 °C - +60 °C

Standards

Reaction to fire (Euroclass)

EN 13501-6: D_ca

Wire colour

white/bluewhite/orangewhite/greenwhite/brownin accordance with IEC 60189 and IEC 60708

Imprint

DATWYLER «cable type» «additional text» «batch number» «meter marks»

Zero halogen, no corrosive gases

IEC 60754-1/-2, EN 60754-1/-2, VDE 0482-754-1/-2, AREI-RGIE Art.104-SA

Flame propagation

IEC 60332-1-2, EN 60332-1-2, VDE 0482-332-1-2, AREI-RGIE Art.104-F1

Smoke density

IEC 61034-1/-2, EN 61034-1/-2, VDE 0482-1034-1/-2, AREI-RGIE Art.104-SD

PoE

IEEE 802.3af

EMC

shielded

Segregation class

Cat./Class

Cat.6_A / Class E_A

Documentation

	EN	DE	NL	FR	CN	ES	IT
Product Datasheet
Tender text
GHMT PM/Channel Certificates
DNV Certificate

Versions

Article No.

CU 6502 4P SHF1